Description: Color PC drum motor’s failure to turn
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the connector of motor for proper drive coupling and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 M2 operation check (C0018) MFPB CNDM3-5 (REM) MFPB CNDM3-8 (LOCK) C-21. 5 Change MFPB.
Description: Color PC drum motor’s turning at abnormal timing
• The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Description: Color developing motor’s failure to turn
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the connector of motor for proper drive coupling and correct as necessary. 3 Check the DCPU connector for proper connection and correct as necessary. 4 Check the MFPB connector for proper connection and correct as necessary. 5 M3 operation check MFPB CNDM2-5 (REM) MFPB CNDM2-8 (LOCK) C-20. 6 Change DCPU. 7 Change MFPB.
Description: Color developing motor’s turning at abnormal timing
• The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary
Description: Transfer cleaner unit new article release
• A new installation is not detected when a new transfer cleaner unit (image transfer belt unit) is installed.
Description: Abnormally low toner density detected cyan TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the TCR sensor window on the underside of the imaging unit if dirty 3 M6, M7 operation check MFPB CNDM2-10 to 13 (M6) MFPB CNDM3-10 to 13 (M7) C-20 C-21. 4 Reinstall imaging unit. 5 Change imaging unit. 6 Change MFPB. 7 Change PRCB.
Description: Abnormally high toner density detected cyan TCR sensor
• TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.
Remedy: 1 Clean the TCR sensor window on the underside of the imaging unit if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB. 5 Change PRCB
Description: Abnormally low toner density detected magenta TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the TCR sensor window on the underside of the imaging unit if dirty 3 M6, M7 operation check MFPB CNDM2-10 to 13 (M6) MFPB CNDM3-10 to 13 (M7) C-20 C-21. 4 Reinstall imaging unit. 5 Change imaging unit. 6 Change MFPB. 7 Change PRCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.