Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.
Description: Imaging unit/C new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/C • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.
Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/M • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.
Description: Imaging unit/Y new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/Y • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.
Description: Imaging unit/K new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/K • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.