• Code: 13F0
• Description: Engine control failure
  • An undefined malfunction occurs in the engine section (PRCB, etc.). While the machine is operating, if it detects defective conditions, e.g. the next print is not started after the lapse of a given period of time, it stops operating and the trouble code is displayed.
• Remedy: 1 Reboot the main body.

• Code: 3C00 ... 3C10
• Description: Trouble related to security
  • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
• Remedy:

• Code: 6751
• Description: Gain adjustment error
  • Reading the white pixel output of each color from the data provided by the shading plate, the machine makes the gain adjustment for each color so that the maximum value of each color becomes within the specified range. However, after the machine attempts the adjustment three times in total (including two retries), the value is out of the specified range.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.

• Code: 6790
• Description: Offset adjustment error
  • Reading the black pixel output of each color from the data provided by the shading plate, the machine makes the offset adjustment for each color so that the average value of each color becomes within the specified range. However, after the machine attempts the offset adjustment three times in total (including two retries), the value is out of the specified range.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.

• Code: 6791
• Description: Register setting error
  • After the default values of AFE gain and offset are set, the machine reads the gain and offset values again. Inconsistency between the values that are set and read is found.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.

• Code: 6792
• Description: White reference plate search error
  • During an initialization, the black edge and the white edge read by the shading plate cannot be detected.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.

• Code: 6793
• Description: Scanner communication error
  • An undefined communication error occurs between the controller and the scanner.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.

• Code: 9401
• Description: Lamp illumination check error
  • In the lamp stabilization check process during the lamp warm-up, light quantity does not become steady within a given period of time.
• Remedy: 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 on MFPB for proper connection and correct as necessary. 4 Change scanner unit. 5 Change MFPB.