Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C35 — Trang 5/6

Code: B116

Description: Communication error with the fax board
• An undefined communication error occurs between the controller and the fax board.
Remedy: 1 Check the connector CN106 on MFPB for proper connection and correct as necessary. 2 Change FAXB. 3 Change MFPB.

Code: C023

Description: FlashROM error
• A SSD board failure occurs.
Remedy: 1 Reboot the main body. 2 Check the SSDB for proper connection and correct as necessary. 3 Change MFPB.

Code: C025

Description: Controller ROM error
Configuration information error
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C026

Description: Controller ROM error (Access error)
• Flash ROM access error is detected during the printer starting.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C027

Description: Controller ROM error (Data error)
• Final check sum error is detected during the printer starting.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C050

Description: HDD access error
• When correct access to the hard disk kit is failed during access.
Remedy: 1 Reboot the main body. 2 Check the connector between HDD-MFPB CN7 for proper connection and correct as necessary. 3 Change HDD. 4 Change MFPB.

Code: C051

Description: HDD full error
• Range for user space is full during access to the hard disk kit.
Remedy: 1 Reboot the main body. 2 Delete the job hold in [PS/PCL PRINT] - [PROOF/PRINT MENU] to increase the available range for user space. 3 Check the connector between HDD-MFPB CN7 for proper connection and correct as necessary. 4 Format HDD with [SYS DEFAULT MENU] - [HDD FORMAT]. 5 Change HDD.

Code: C060

Description: Firmware update error
• Firmware update fails to complete correctly during update.
Remedy: 1 Reboot the main body. 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Check the firmware update file and if the file is not the correct one, update the firmware again. 4 Check the firmware update procedure and if the procedure is not correct, update the firmware again. 5 Update the firmware again. - - 6 Check the MFPB connector for proper connection and correct as necessary. 7 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie