Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C35 — Trang 6/6

Code: C072

Description: Counter not installed
• The total counter (TCT) is not installed.
Remedy: 1 Reboot the main body. 2 Check the connector between TCT-PRCB PJ13 for proper connection and correct as necessary. 3 Change PRCB.M

Code: C080

Description: Memory error
• The failure of the RAM on the MFP board occurs.
Remedy: 1 Reboot the main body. 2 Change MFPB.

Code: C900

Description: Successful completion of counter backup
• The counter backup process is completed successfully
Remedy: When this code is displayed, turn OFF/ON the power switch and then perform the given steps.

Code: C907

Description: Abnormal end of counter backup
• The counter backup process results in an abnormal end due to a write error or other reasons.
Remedy: 1 Check the MFPB connector for proper connection and correct as necessary 2 Check the SSDB connector for proper connection and correct as necessary 3 Change MFPB. 4 After taking the above actions, if the counter backup process results in the same trouble code again, the SSD can be broken. In this case, the counter backup is unavailable.

Code: FFFF

Description: Interface communication error
• Correct communication is failed when receiving/sending the command between PRCB and MFPB/2.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change PRCB. 5 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie