Description: Exposure Lamp turning ON at abnormal timing
• The average output value of the CCD Sensor with the Scanner at its standby position is a predetermined value or more at the end of a scan job.
Remedy: 1 Check the flat cable for proper connection and correct or change as necessary. 2 Change Scanner Assy. 3 Change PWB-C.
Description: Standard controller configuration failure
• The controller of the printer control board (PRCB) is faulty.
Remedy: 1 Check to see if the following setting has been correctly made: Service Mode?h - System - Image Controller Setting.?h If the setting is changed, be sure to turn OFF and ON the Main Power Switch. 2 Check the connectors of the MFP Control Board (PWB-MFPC) for proper connection and correct as necessary. 3 Change PWB-MFPC.