Remedy: 1 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty 2 Clean the TCR Sensor LED if dirty. 3 Correct the contact and/or WIRING of the TCR Sensor if faulty. 4 Reinstall Imaging Unit C/M/Y. 5 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8 C to D-14. 6 Change Imaging Unit. 7 Change PWB-MC. 8 Change PWB-MFPC.
Remedy: 1 Correct the TCR connection on the underside of the Imaging Unit if faulty. 2 Clean or correct each contact of the Imaging Unit if faulty. 3 Change Imaging Unit. 4 Change PWB-MC. 5 Change PWB-MFPC.
Description: Cyan Imaging Unit EEPROM access error
• A condition of “EEPROM is not connected” or “There is an access error” is detected in EEPROM of the Imaging Unit.
Remedy: 1 Clean the connection between the Imaging Unit and the machine if dirty 2 Reinstall Imaging Unit C/M/Y/K. 3 Change Imaging Unit. 4 Change PWB-MC.
Description: Magenta Imaging Unit EEPROM access error
Remedy: 1 Clean the connection between the Imaging Unit and the machine if dirty 2 Reinstall Imaging Unit C/M/Y/K. 3 Change Imaging Unit. 4 Change PWB-MC.
Description: Yellow Imaging Unit EEPROM access error
Remedy: 1 Clean the connection between the Imaging Unit and the machine if dirty 2 Reinstall Imaging Unit C/M/Y/K. 3 Change Imaging Unit. 4 Change PWB-MC.
Description: Black Imaging Unit EEPROM access error
Remedy: 1 Clean the connection between the Imaging Unit and the machine if dirty 2 Reinstall Imaging Unit C/M/Y/K. 3 Change Imaging Unit. 4 Change PWB-MC.
Description: Cyan LPH correction data download failure
• An error is detected while the LPH correction data is being downloaded from EEPROM of LPH to PWB-MFPC when the Main Power Switch is turned ON.
Remedy: 1 Correct the harness connection between LPH and PWB-LED if faulty. 2 Correct the harness connection between PWBLED and PWB-MFPC if faulty. 3 Change LPH Assy. 4 Change PWB-LED. 5 Change PWB-MFPC. 6 Change PWB-MC.
Description: Magenta LPH correction data download failure
Remedy: 1 Correct the harness connection between LPH and PWB-LED if faulty. 2 Correct the harness connection between PWBLED and PWB-MFPC if faulty. 3 Change LPH Assy. 4 Change PWB-LED. 5 Change PWB-MFPC. 6 Change PWB-MC.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.