Description: Setting parameter load error (LDR). Upon startup, the processing of the loadable device driver setting data file failed. • RAM disk file creation failed. • Reading from the flash ROM failed. • An error occurred in API of the authentication module.
Causes: MFP board (MFPB)
Remedy: 1 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 2 Reinstall the loadable device driver. - - 3 Rewrite the firmware. - - 4 Replace MFPB
Description: Authentication device general error. When using the authentication device, authentication data is not to meet the specifications.RAM disk file creation failed.
Remedy: 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch.
Remedy: 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 3 Re-register the user authentication information. - - 4 Replace authentication device.
Description: • User registration error • Card information setting error. IC card advanced settings data or authentication information data is not correct when starting-up the authentication device, setting the IC card advanced settings or registering/editing the authentication information.
Remedy: 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 3 Reset the authentication settings. (card type, IC card advanced settings, and etc.) - - 4 Re-register the user authentication information
Remedy: 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch.
Description: Acquisition failure of the number of trials/Initialize error of number of authentication. An error occurred during user authentication using optional authentication unit AU-102.
Remedy: 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 3 Reset the number of authentication trials
Description: JOB RAM save error. The error in save of job data to the memory/ hard disk and its read error are detected.
Causes: • MFP board (MFPB) • Hard disk
Remedy: 1 Check the hard disk connector for proper connection and correct as necessary. - - 2 Format the hard disk. - - 3 Replace the hard disk - - 4 Replace MFPB
Description: Hard disk access error (connection failure). Unable to communicate between the hard disk and printer control board (PRCB).
Causes: • MFP board (MFPB) • Hard disk
Remedy: 1 Check the hard disk connector for proper connection and correct as necessary. - - 2 Reinstall the hard disk. - - 3 Replace the hard disk 4 Replace MFPB
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.