0

Các lỗi thường gặp

Code :
  • Code: C-1248
  • Description: The overlap home sensor (PS17) does not turn ON within a specified period of time after the overlap motor (M13) starts the home position search operation. Or, even after a specified period of time after M13 starts the operation, it does not stop.
  • Causes: • Overlap motor (M13) • Overlap home sensor (PS17) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the overlap section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 2-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 2-D) 6. Replace PS17. 7. Replace M13. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1249
  • Description: The folding main scan alignment home sensor /Rr (PS19) does not turn ON within a specified period of time after the folding main scan alignment motor /Rr (M14) starts the home position search operation. Or, even after a specified period of time after M14 starts the operation, it does not stop.
  • Causes: • Folding main scan alignment motor /Rr (M14) • Folding main scan alignment home sensor / Rr (PS19) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the folding main scan alignment section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 11-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 12-D) 6. Replace PS19. 7. Replace M14. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1250
  • Description: The stapler movement home sensor (PS25) does not turn ON within a specified period of time after the home position search operation of the stapler movement motor (M15) starts. Or, even after a specified period of time after M15 starts the operation, it does not stop.
  • Causes: • Stapler movement motor (M15) • Stapler movement home sensor (PS25) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the stapler movement section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 15-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 18-D) 6. Replace PS25. 7. Replace M15. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1251
  • Description: The saddle stitching alignment home sensor /Lt (PS29) does not turn ON within a specified period of time after the saddle stitching alignment motor / Lt (M16) starts the home position search operation. Or, even after a specified period of time after M16 starts the operation, it does not stop.
  • Causes: • Saddle stitching alignment motor /Lt (M16) • Saddle stitching alignment home sensor / Lt (PS29) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the saddle stitching alignment section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 15-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 17-D) 6. Replace PS29. 7. Replace M16. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1252
  • Description: The bundle press movement home sensor (PS36) does not turn ON within a specified period of time after the bundle press movement motor (M17) starts the home position search operation. Or, even after a specified period of time after M17 starts the operation, it does not stop.
  • Causes: • Bundle press movement motor (M17) • Bundle press movement home sensor (PS36) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the bundle press movement section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:SD-506:26-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram:SD-506:22-D) 6. Replace PS36. 7. Replace M17. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1253
  • Description: The 1st folding blade home sensor (PS21) does not turn ON within a specified period of time after the 1st folding blade motor (M18) starts the home position search operation. Or 1st folding blade home sensor /1 (PS20) does not turned ON within a specified period of time after M18 starts the operation.
  • Causes: • 1st folding blade motor (M18) • 1st folding blade home sensor /1 (PS20), /2 (PS21) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the 1st folding section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 11-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 12-D) 6. Replace PS20. 7. Replace M18. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1254
  • Description: The 2nd folding blade home sensor /2 (PS23) does not turn ON within a specified period of time after the 2nd folding blade motor (M19) starts the home position search operation. Or the 2nd folding blade home sensor /1 (PS22) does not turned ON within a specified period of time after M19 starts the operation.
  • Causes: • 2nd folding blade motor (M19) • 2nd folding blade home sensor /1 (PS22), /2 (PS23) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-2
  • Remedy: 1. Check the 2nd folding section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:SD-506:11-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram:SD-506:12-D, 13-D) 6. Replace PS22. 7. Replace M19. 8. Replace SDDB. 9. Replace SDCB.
  • Code: C-1255
  • Description: The clincher up down home sensor (PS26) does not turn ON even after a specified period of time after the clincher up down motor (M20) starts the home position search. Or, even after a specified period of time after M20 starts the operation, it does not stop.
  • Causes: • Clincher up down motor (M20) • Clincher up down home sensor (PS26) • SD control board (SDCB) • SD drive board (SDDB) DIPSW7-0
  • Remedy: 1. Check the clincher up down section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 16-D) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-506: 18-D) 6. Replace PS26. 7. Replace M20. 8. Replace SDDB. 9. Replace SDCB.
‹ First  < 45 46 47 48 49 50 51 >  Last ›
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục