Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1050P — Trang 18/42

Code: SC34-03

Description: Thermistor /1 (TH1) high temperature detection (hardware). An abnormal condition is detected with the fusing error detection signal 1.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC34-04

Description: Thermistor /3 (TH3) high temperature detection (hardware). An abnormal condition is detected with the fusing error detection signal 4.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC35-01

Description: Thermistor /1 (TH1) low temperature detection (software). The TH1 does not get to 50°C when a specified period of time elapses after the main switch (SW1) is turned ON for the fusing ON control.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC35-02

Description: Thermistor /3 (TH3) low temperature detection (software). The TH3 does not get to 50°C when a specified period of time elapses after the main switch (SW1) is turned ON for the fusing ON control.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC36-01

Description: Thermistor /1 (TH1) high temperature detection (long time/software). The TH1 detects a temperature of 200°C or above 30 times in a row in a period of 1 second.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC36-02

Description: Thermistor /3 (TH3) high temperature detection (long time/software). The TH3 detects a temperature of 220°C or above 30 times in a row in a period of 1 second.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC36-03

Description: Thermistor /1 (TH1) low temperature detection (hardware). The TH1 detects an abnormal condition with the fusing error detection signal 2.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4) Caution: • When SC34-**, SC35-** or SC36-** (fusing temperature related abnormalities) occur, be sure to repair defective parts before setting the software DIPSW3-1 to 0. Setting the DIPSW3- 1 to 0 with defective parts not repaired may result in a fire.
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC36-04

Description: Thermistor /3 (TH3) low temperature detection (hardware). The TH3 detects an abnormal condition with the fusing error detection signal 5.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4) Caution: • When SC34-**, SC35-** or SC36-** (fusing temperature related abnormalities) occur, be sure to repair defective parts before setting the software DIPSW3-1 to 0. Setting the DIPSW3- 1 to 0 with defective parts not repaired may result in a fire.
Remedy: The main body stops immediately to turn OFF the RL1 (main).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie