Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1200 — Trang 45/91

Code: C-1243

Description: Folding sub scan alignment exit motor (M8) The folding exit home sensor (PS24) does not turn ON even after a specified period of time after M8 starts the home position search operation. Or, even after a specified period of time after M8 starts to decelerate, it does not stop. 34-0/1/2/3
Causes: Folding exit home sensor (PS24: SD-506) Folding sub scan alignment exit motor (M8: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the folding sub scan alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 10-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 14-D 6 Replace PS24. - 7 Replace M8. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1244

Description: Saddle stitching alignment motor /Rt (M9) drive abnormality. The saddle stitching alignment home sensor /Rt (PS28) does not turn ON even after a specified period of time after M9 starts the home position search operation. Or, even after a specified period of time after M9 starts the operation, it does not stop. 34-0/1/3
Causes: Saddle stitching alignment home sensor /Rt (PS28: SD-506) Saddle stitching alignment motor /Rt (M9: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the saddle stitching alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 19-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS28. - 7 Replace M9. - 8 Replace SDDB. - 9 Replace SDCB. -

Code: C-1245

Description: Bundle arm motor (M10) drive abnormality. The bundle arm home sensor (PS32) does not turn ON even after a specified period of time after M10 starts the home position search operation. Or, even after a specified period of time after M10 starts the operation, it does not stop. Bundle arm motor (M10) 34-0/1/3
Causes: Bundle arm home sensor (PS32: SD-506) Bundle arm motor (M10: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle arm section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 19-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS32. - 7 Replace M10. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1246

Description: Bundle clip motor (M11) drive abnormality. The bundle click upper limit (PS33) does not turn ON even after a specified period of time after M11 starts the home position search operation. Or, even after a specified period of time after M11 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle clip upper limit sensor (PS33: SD-506) Bundle clip motor (M11: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle clip section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 16-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 19-D 6 Replace PS33. - 7 Replace M11. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1247

Description: Bundle registration motor (M12) drive abnormality. The bundle registration home sensor (PS34) does not turn ON even after a specified period of time after M12 starts the home position search operation. Or, even after a specified period of time after M12 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle registration home sensor (PS34: SD-506) Bundle registration motor (M12: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle registration section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 27-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 21-D 6 Replace PS34. - 7 Replace M12. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1248

Description: Overlap motor (M13) drive abnormality. The overlap home sensor (PS17) does not turn ON even after a specified period of time after M13 starts the home position search operation. Or, even after a specified period of time after M13 starts the operation, it does not stop. 34-0/1/2/3
Causes: Overlap home sensor (PS17: SD-506) Overlap motor (M13: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the overlap section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 2-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 2-D 6 Replace PS17. - 7 Replace M13. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1249

Description: Folding main scan alignment motor /Rr (M14) drive abnormality. The folding main scan alignment home sensor /Rr (PS19) does not turn ON even after a specified period of time after M14 starts the home position search operation. Or, even after a specified period of time after M14 starts the operation, it does not stop. 34-0/1/2/3
Causes: Folding main scan alignment home sensor /Rr (PS19: SD-506) Folding main scan alignment motor /Rr (M14: SD- 506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the folding main scan alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 11-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 12-D 6 Replace PS19. - 7 Replace M14. - 8 Replace SDDB. - 9 Replace SDCB.

Code: C-1250

Description: Stapler movement motor (M15) drive abnormality. The stapler movement home sensor (PS25) does not turn ON even after a specified period of time after M15 starts the home position search operation. Or, even after a specified period of time after M15 starts the operation, it does not stop. 34-0/1/3
Causes: Stapler movement home sensor (PS25: SD-506) Stapler movement motor (M15: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the stapler movement section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 15-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 18-D 6 Replace PS25. - 7 Replace M15. - 8 Replace SDDB. - 9 Replace SDCB. -
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie