• Code: C0950
• Description: 4th Drawer Lift-Up Motor Failure
• Remedy: 1 Check the connectors of each motor and sensor for proper connection, and correct as necessary. 2 Check the connector of each motor for proper drive coupling, and correct as necessary. 3 Check the PU1 connector for proper connection, and correct as necessary. 4 PC6 sensor check. 5 PC12 sensor check. 6 PC114-PF sensor check. 7 PC123-PF sensor check. 8 M7 operation check. 9 M8 operation check. 10 M124-PF operation check. 11 M125-PF operation check. 12 Replace PWB-A. 13 Replace the PWB-C2 PF Control Board. 14 Replace PU1.

• Code: C0960
• Description: Manual Bypass Paper-Lifting Failure
  • The Manual Feed Tray Lift-Up Sensor (PC29) is not blocked or unblocked even after the set period of time has elapsed after the Manual Paper Feed Pick-Up Solenoid (SL3) is energized after the manual feed paper take-up operation has begun.
• Remedy: 1 Check the SL3 connector for proper connection, and correct as necessary. 2 PC29 sensor check. 3 SL3 operation check. 4 Replace PWB-A. 5 Replace PU1.

• Code: C0990
• Description: LCC Elevator Motor Failure
  • The Elevator Motor Pulse Sensor (PC10-LCC) cannot detect both edges of H/L even after the set period of time has elapsed while the Elevator Motor (M5-LCC) is turning backward/forward (raise/lower).
• Remedy: 1 Check the motor connectors and other connectors for proper connection, and correct as necessary. 2 PC10-LCC sensor check. 3 M5-LCC operation check. 4 Replace PWB-A.

• Code: C0991
• Description: LCC Lift Failure
  • The Tray Upper Limit Sensor (PC4-LCC) is not unblocked even after the set period of time has elapsed after the paper lift-up operation has begun. • The Tray Upper Limit Sensor (PC4-LCC) is not unblocked even after the set pulse is detected by the Elevator Motor Pulse Sensor (PC10-LCC) after the paper lift-up operation has begun. • The Tray Upper Limit Sensor (PC4-LCC) is not unblocked even after the set period of time has elapsed with paper loaded during the paper lift-up operation. • The Tray Lower Position Sensor (PC13-LCC) is not blocked even after the set pulse is detected by the Elevator Motor Pulse Sensor (PC10-LCC) after the paper lift-up operation has begun. • The Tray Lower Position Sensor (PC13-LCC) is not blocked even after the set period of time has elapsed after the lowering operation has begun. • The Tray Lower Position Sensor (PC13-LCC) is not unblocked even after the set pulse is detected by the Elevator Motor Pulse Sensor (PC10-LCC) after the lowering operation has begun. • The Tray Upper Limit Sensor (PC4-LCC) is not blocked even after the set pulse is detected by the Elevator Motor Pulse Sensor (PC10-LCC) after the paper lift-up operation has begun. • The Lower Limit Sensor (PC7-LCC) is not unblocked during the lowering operation.
• Remedy: 1 Check the sensor connector for proper connection, and correct as necessary. 2 PC4-LCC sensor check. 3 PC13-LCC sensor check. 4 PC10-LCC sensor check. 5 PC7-LCC sensor check. 6 Replace PWB-C1 LCC.

• Code: C0996
• Description: LCC Lock Release Failure
  • The drawer cannot be determined to be out of position even after the set period of time has elapsed after the Tray Lock Solenoid (SL1-LCC) is energized after the lowering operation is finished.
• Remedy: 1 Check the SL1-LCC connector for proper connection, and correct as necessary. 2 SL1-LCC operation check. 3 Replace PWB-C1 LCC.

• Code: C0997
• Description: LCC Shift Gate Operation Failure
  • The Shift Gate Home Position Sensor (PC14-LCC) cannot be set to L even after the set period of time has elapsed after the operation of the Shift Gate Motor (M3-LCC) has begun with the Shift Gate Home Position Sensor (PC14-LCC) set to L.
• Remedy: 1 Check the PC14-LCC connector for proper connection, and correct as necessary. 2 PC14-LCC sensor check. 3 M3-LCC operation check. 4 Replace PWB-C1 LCC.

• Code: C0998
• Description: LCC Shift Failure
  • The Shifter Return Position Sensor (PC11-LCC) is not unblocked even after the set period of time has elapsed after the shift operation has begun (shifter is moved to the right). • The Shifter Return Position Sensor (PC11-LCC) is not unblocked even after the set pulse is detected by the Shift Motor Pulse Sensor (PC8-LCC) after the shift operation has begun (shifter is moved to the right). • The Shifter Home Position Sensor (PC12-LCC) is not unblocked even after the set pulse is detected by the Shift Motor Pulse Sensor (PC8-LCC) after the shift operation has begun (shifter is moved to the right). • The Shifter Home Position Sensor (PC12-LCC) is not unblocked even after the set period of time has elapsed after the return operation has begun (shifter is moved to the left). • The Shifter Home Position Sensor (PC12-LCC) is not unblocked even after the set pulse is detected by the Shift Motor Pulse Sensor (PC8-LCC) after the return operation has begun (shifter is moved to the left). • The Shifter Return Position Sensor (PC11-LCC) is not unblocked even after the set pulse is detected by the Shift Motor Pulse Sensor (PC8-LCC) after the return operation has begun (shifter is moved to the left).
• Remedy: 1 Check the connector for proper connection, and correct as necessary. 2 PC8-LCC sensor check. 3 PC11-LCC sensor check. 4 PC12-LCC sensor check. 5 Replace PWB-C1 LCC.

• Code: C099C
• Description: LCC Shift Motor Failure
  • The Shift Motor Pulse Sensor (PC8-LCC) cannot detect both the rising and falling edges of H/L even after the set period of time has elapsed while the Shift Motor (M4-LCC) is turning backward/forward (raise/lower).
• Remedy: 1 Check the motor connectors and other connectors for proper connection, and correct as necessary. 2 PC8-LCC sensor check. 3 M4-LCC operation check. 4 Replace PWB-C1 LCC.