• Code: 201.24
• Description: A 201.08 jam occurred and was notcleared. Possible cause Failure to open and close the top access door.
• Remedy: This error is generated as a protection for possible paper wrap in the fuser. • Open the top access door, and check for a paper jam. Close the top access door.

• Code: 201.31
• Description: Paper is jammed between the inputsensor and the exit sensor during warm-up. Possible causes:
  • Damaged paper exit sensor or paper exit sensor flag.
  • Transport belt module failure.
  • Lower guide failure
  • Damaged fuser autoconnect.
  • Faulty fuser DC cable connection.
  • Faulty fuser.
  • Faulty system board.
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 202.02
• Description: Exit sensor is made when printer tries to print from an idle state. Possible causes:
  • Damaged paper exit sensor orpaper exit sensor flag
  • Damaged fuser autoconnect
  • Faulty fuser DC cable connection
  • Faulty fuser
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly.

• Code: 202.12
• Description: Exit sensor broke early. Possible causes:
  • Damaged paper exit sensor orpaper exit sensor flag
  • Faulty fuser
  • Faulty system board
• Remedy: The fuser exit sensor may not be functioning properly.

• Code: 202.13
• Description: Exit sensor never broke. Possible causes:
  • Damaged paper exit sensor orpaper exit sensor flag
  • Faulty fuser
  • Faulty system board
  • Faulty output bin flag
• Remedy: • Check exit sensor flag on fuser for proper operation. Ensure that paper is not hanging on the flag. • The fuser exit sensor may not be functioning properly.

• Code: 202.17
• Description: Exit sensor is made when the printerpowers up or covers are closed. Possible causes:
  • Damaged paper exit sensor or paper exit sensor flag
  • Damaged fuser autoconnect
  • Faulty fuser DC cable connection
  • Faulty fuser
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly

• Code: 202.21
• Description: Fuser motor stalled. Possible causes:
  • Faulty cable/connector
  • Faulty fuser motor
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 202.31
• Description: Paper jam at exit sensor during warm-up. Possible causes:
  • Damaged paper exit sensor orpaper exit sensor flag.
  • Damaged fuser autoconnect.
  • Faulty fuser DC cable connection.
  • Faulty fuser.
  • Faulty system board.
• Remedy: • Check for anything in the paper path that might cause the paper to jam.