• Code: H5-33
• Description: Puncher Move Home SENSOR ON Fail
• Causes: The Puncher Move Home Sensor is not turned ON even when the specified time passed after the Puncher Move Motor is ON. Or the Puncher Move Home Sensor is turned OFF again after the Puncher Move Home Sensor is turned ON and the Puncher Move Motor stopped its rotation.

• Code: H5-34
• Description: Puncher Move Home SENSOR OFF Fail
• Causes: The Puncher Move Home Sensor is not turned OFF even when the specified time passed after the Puncher Move Motor is ON. Or the Puncher Move Home Sensor is turned ON again after the Puncher Move Home Sensor is turned OFF and the Puncher Move Motor stopped its rotation.

• Code: H5-4
• Description: Finisher NVM R/W error
• Causes: A read/write error occurred on the NVM of the PWB MAIN-C.

• Code: H5-7
• Description: MCU-Finisher comm. error
• Causes: A communication error occurred between the PWBA MCU F and the Finisher.

• Code: H5-8
• Description: Finisher type error
• Causes: A different type of Finisher is connected.

• Code: H5-81
• Description: Eject Clamp Home SENSOR ON Fail
• Causes: The Eject Clamp Home Sensor is not turned ON within 500 ms after the Eject Clamp Up starts.

• Code: H5-82
• Description: Eject Clamp Home SENSOR OFF Fail
• Causes: The Eject Clamp Home Sensor is not turned OFF within 200 ms after the Eject Clamp Down starts.

• Code: H5-83
• Description: Set Clamp Home SENSOR ON Fail
• Causes: The Set Clamp Home Sensor is not turned ON within 200 ms after the Set Clamp starts operating.