Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C830

Code: -

Display: WDT ERROR R14=xxxx
Description: PU firmware runaway
Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

Code: -

Display: ASIC ERROR
Description: CU board (CU) DCON access error * DCON clock output abnormity
Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.

Code: -

Display: SDRAM ERROR
Description: CU board (CU) DCON access error * RAMRD/WR abnormity for VIDEO
Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.

Code: -

Display: ABORT xxx = xxxxxxxx
Description: PU firmware runaway
Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

Code: -

Display: IRQXX_IPT
Description: PU firmware runaway
Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.

Code: 001

Display: Contact the Service center. 001: Error
Description: Machine Check Exception
Remedy: Replace CU board

Code: 002 ... 007

Display: Reboot the printer. 002: Error ~ 007: Error
Description: CPU Exception
Remedy: Does the error display recur? If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU board. Re-install the RAM DIMM. Replace the RAM DIMM.

Code: 020

Display: Contact the Service center. 020: Error
Description: CU ROM Hash Check Error
Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie