Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C830 — Trang 3/9

Code: 052

Display: Reboot the printer. 052: Error
Description: Image Processor Driver Error
Remedy: Turn the printer power off and then back on. If the error symptom remains unchanged, replace the CU board.

Code: 070

Display: Reboot the printer. 070: Error
Description: PostScript Internal Error
Remedy: Turn power to OFF/ON.

Code: 072

Display: Reboot the printer. 072: Error. Xx
Description: Engine I/F Error. I/F error between PU and CU
Remedy: Is the CU assembly installed normally? Does the printer recover from the error when the CU board is replaced?
Re-install the CU assembly normally. Replace the CU board. Replace the PU Board.

Code: 073

Display: Reboot the printer. 073: Error xxxxxxxx
Description: Video Error Error is detected when expanding the video data. (Illegal data is received.)
Remedy: Is the CU assembly installed normally? Does this error recur?
Re-install the CU assembly normally. Change the PC with another PC having high specifications, or alternately reduce resolution power and execute the print again. Replace the CU board. Replace the interface cable. Re-install the PC Printer driver.
Is the CU assembly installed normally? Does this error recur? Does the error depend on print Data?
Re-install the CU assembly normally. Execute the print again. Print any other data. Replace the CU board. Send the data to design division and request analysis of the data.

Code: 074, 075

Display: Reboot the printer. 074: Error xxxxxxxx 075: Error xxxxxxxx
Description: Video Error Error is detected when expanding the video data.
Remedy: Is the CU assembly installed correctly?
Re-install the CU assembly normally. Replace the CU board.

Code: 081

Display: Contact the Service center. 081: Error
Description: Parameter integrity check
Remedy: Either EEPROM or Flash ROM cannot read/write normally. Turn the printer power off and then back on. If the error symptom remains unchanged, replace the CU board.

Code: 104

Display: Contact the Service center. 104: Error
Description: Read/write error of the engine EEPROM is detected.
Remedy: Does this error recur? Yes Turn off the power of the printer and back on. Replace the PU Board.

Code: 106

Display: Contact the Service center. 106: Error
Description: Engine control logic has an error.
Remedy: Does this error recur? Yes Turn off the power of the printer and back on. Replace the PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie