Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C830 — Trang 7/9

Code: 190

Display: Reboot the printer. 190: Error
Description: System memory overflow
Remedy: Does this error recur? Yes Turn on the power again. Increase the add-on RAM DIMM.

Code: 200, 201, 202

Display: Contact the Service center. 200: Error - 202: Error
Description: PU Firmware Download Error
Remedy: Error has occurred during rewriting of the PU firmware. After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)

Code: 203, 204, 207, 208, 214, F0C, FFF

Display: Reboot the printer.
203: Error
204: Error
207: Error
208: Error
214: Error
FOC: Error
FFF: Error
Description: CU program error (The error numbers 203 through 214 do not occur under the normal operation.)
Illegal processing is executed by the CU program.
Remedy: Illegal processing is executed by the CU program. After turning off the power, check the normal connection between CU board and PU board. Then, turn on the power again.

Code: 209

Display: Reboot the printer. 209: Download Error
Description: Custom Media Type table downloading has failed.
Remedy: Custom Media Type table downloading has failed. After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)

Code: 230

Display: Contact the Service center. 230: Error
Description: RFID Reader not Installed
Remedy: RFID read device error Does this error recur?
Check the normal connection of RFID R/W board. Replace the RFID R/W board. Replace the P6X board.

Code: 231

Display: Contact the Service center. 231: Error
Description: RFID reader I/F error
Interface error with the RFID reader is detected.
01: Communication error between the RFID reader and the engine circuit boards.
02: Error in the wireless circuit of the RF ID reader
03: Communication error between the RFID reader and the tag chip.
04: Error is detected in the RFID tag chip. (In more than 4 chips)
Remedy: 01: Same as the error no. 230 02: Replace the RFID R/W board. 03: Check for normal connection of the antenna cable. 04: Check if quantity of the RFID Tag is correct or not.

Code: 250

Display: Reboot the printer. 250: Error
Description: The erasing error of encrypted file has been detected.
Remedy: Has the User known that HDD ERASE is performed? Yes Inform the User that it is necessary to perform Disk ERASE and revert the HDD as the purchasing status in order to delete the encrypted file. (ADMIN MENU HDD ERASE)

Code: 251

Display: Contact the Service center. 251: Error
Description: Secure Disk Erasing Error
Error has been detected in the Disk ERASE.
Remedy: Error has been detected in the Disk ERASE. Does the error display recur? Yes
Electrical power OFF/ON Replace HDD
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie