Display: Service Call 131: Y Head 132: M Head 133: C Head 134: K Head
Description: After turning ON the power or when cover is closed, the sensor detects that the unit is missing.
Remedy: 1) Is an Error message displayed? Yes Check the OED head unit. 2) Is the LED head properly mounted? No Turn ON power again. 3) Does the Error take place again? Yes Replace LED head Assy.
Remedy: 1) Is an Error message displayed? Yes Turn ON power again. Confirm that the Y, M, and C 2) Does the Error take place again? Yes ID units are in position, and reboot.
Display: Service Call 144: Y ID 145: M ID 146: C ID 147: K ID
Description: This is indicated when the toner feed switch error or the toner lock-lever-open error occurs repeatedly when new toner is used.
Remedy: 1) Is the toner locklever- open error indicated? Yes Confirm that the lever is in position. 2) Does the problem persist even if the ID units are replaced? Yes Replace the toner feed unit. No Replace the ID units.
Remedy: 1) Is an Error message displayed? Yes Replace toner sensor or Assy (SGG-PCB). 2) Does the Error take place again? Yes Replace toner sensor or Assy (SGG-PCB).
Remedy: 1) Is an Error message displayed? Yes Turn ON power again. 2) Does the Error take place again? Yes Leave for 30 minutes then turn ON power again.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.