Description: High voltage power supply interface error.
Remedy: Is the cable connecting the CU/ PU board to the high voltage unit connected normally? Have you checked defective contact of contactor points? Re-connect them normally. Check for defective contact of the high voltage system. Replace the high voltage power supply.
Remedy: Is the fan (bottom right of the front) of the low voltage power supply block working? Is the fan connector connected normally? Check for sure connection of the fan connector. Replace the CU/ PU board. Replace the fan motor.
Description: Dew condensation of the printer is detected.
Remedy: This error can easily occur when a printer is brought in to indoor from outdoor. Leave the printer for 2 hours or half day under room temperature, and turn on the power again. Does this error recur? Yes After leaving a printer under room temperature, turn on the power again. Replace the control panel board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.