Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI Pro6410 Neon — Trang 7/7

Code: 928

Display: Service call 928: Error
Description: Fuser motor lock error
Remedy: Fuser does not rotate normally. Does this error recur?
Check if the fuser is installed normally or not. Replace the fuser. Replace the fuser motor.

Code: 980

Display: Service call 980: Error
Description: Media wrapped around the fuser error
Remedy: Media has wrapped around the fuser. Turn off the power. Replace the fuser.

Code: 982

Display: Service call 982: Error
Description: 4th tray detection error
Remedy: The 4th tray is installed. Remove the 4th tray.

Code: 983

Display: Service call 983: Error
Description: Error due to detection of the toner cartridges of the same color
Remedy: Two or more toner cartridges of the same color are detected. Install the cartridge of the specified in the specified position.

Code: 984 ... 987

Display: Service call 984: Error~ 987: Error
Description: Detection of an unsupported toner cartridge. An unsupported toner cartridge has been detected. 984:White/Black toner cartridge position 985:Yellow toner cartridge position 986:Magenta toner cartridge position 987:Cyan toner cartridge position
Remedy: Replace it with an appropriate toner cartridge.

Code: FOC, FFF

Display: Re-start the printer. 203: Error 204: Error 207: Error 208: Error 214: Error FOC: Error FFF: Error
Description: CU program error (The error numbers 203 through 214 do not occur under the normal operation.)
Remedy: Illegal processing is executed by the CU program. After turning off the power, check for the normal connection CU/ PU board. Then, turn on the power again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie