Description: A heavy trouble of the CU substrate (defective substrate or power supply capacity shortage) was detected.
Remedy: Is the error display reproducible? Yes Power OFF/ON Is the error display reproducible? Yes Replace CU PCB. (Must replace EEPROM)
Code: 002 ... 007
Display: Service Call Power off/on nnn: Fatal Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn 002: Error to 007: Error
Description: This stems from a variety of causes. For analyzing causes, record three numbers (called program counting value) indicated below LCD column and a printer firmware version. [Cause] (1) Unmatched print data and printer FW (2) Damaged EEPROM data (3) Defect ROM DIMM or RAM DIMM (4) Defect components etc. of CPU and ASIC (5) Others Keep on an alyzing causes if an error still remains. Above mentioned (1) to (4) is likelihood of causes.
Remedy: Record three digital numbers below LCD column. Restart with OFF/ON? Yes Notify three digital numbers below LCD column and F/W version. Does an error occur in a particular print data? No Check if it occurs depending on a print data. Is the error display reproducible? Yes Request for print data investigation. No Change RAM DIMM or ROM DIMM. Is the error display reproducible? Is the error display reproducible? Yes Replace CU PCB. (Must replace EEPROM) Yes Initialize EEPROM. No Re-execute Network setup, such as user setup etc. for use. Yes Change the printer.
Code: 025
Display: Service Call 025: Error
Description: CU Font ROM Hash Error1
Remedy: Detected a Font Data hash check error. (Japan Model only) Replace CU PCB. (Must replace EEPROM)
Code: 030
Display: Service Call 030: Error
Description: CU Resident RAM Check Error
Remedy: Is the error display reproducible? Yes Replace CU PCB. (Must replace EEPROM)
Code: 031
Display: Service Call 031: Error
Description: CU Slot1 DIMM RAM Check Error
Remedy: Is the applicable RAM DIMM mounted properly? No Re-mount applicable RAM DIMM. Is operation restored by replacing the applicable RAM DIMM? Yes Replace RAM DIMM. No Replace CU PCB. (Must replace EEPROM)
Code: 037
Display: Service Call 037: Error
Description: Slot2 RAM Spec error Specification of DIMM in CU RAM slot2 is unsupported.
Remedy: Is this a standard RAM DIMM? No Use a standard RAM DIMM. Is the applicable RAM DIMM difference mounted normal? No Re-mount applicable RAM DIMM. Replace RAM DIMM. Is operation restored by replacing the applicable RAM DIMM? Yes Replace CU PCB. No (Must replace EEPROM)
Code: 040
Display: Service Call 040: Error
Description: CU EEPROM ERROR
Remedy: Is the problem corrected by replacing the CU PCB EEPROM? Yes REPLACE EEPROM. (User must correct environmental conditions) No Replace CU PCB. (Must replace EEPROM)
Code: 041
Display: Service Call 041: Error
Description: CU FLASH ERROR CU PCB flash ROM error
Remedy: Is the error display reproducible? Yes Replace CU PCB. (Must replace EEPROM)