Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI pro905 — Trang 10/11

Code: 926

Display: Power Off/on 926: Error
Description: Tray4 24V Abnormal Voltage Detection
Remedy: 24 V power is not supplied to tray 4 properly Check to confirm that tray 4 is mounted correctly.

Code: 927

Display: Power Off/on 927: Error
Description: Tray5 24V Abnormal Voltage Detection
Remedy: 24 V of power is not supplied to tray 5 properly Check to confirm that tray 5 is mounted correctly.

Code: 928

Display: Power Off/on 928: Error
Description: Fuser Motor Lock Error
Remedy: The fuser is not operating properly. Does the error still occur? Yes Check to confirm that fuser is in position. Replace fuser Yes Replace the fuser motor.

Code: 929

Display: Power Off/on 929: Error
Description: Waste Toner Transfer Motor Lock Error
Remedy: The waste toner transfer motor is not operating properly. Does the error still occur? Yes Check to confirm that the waste toner transfer system is operating properly. Replace waste toner motor

Code: 930

Display: Power Off/on 930: Error
Description: Sub-CPU Clock Frequency Error
Remedy: The Sub-CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the S2P board. Replace the S2P board.

Code: 931

Display: Power Off/on 931: Error
Description: Duplex CPU Clock Frequency Error
Remedy: The duplex CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V72-18 board. Replace the V72-18 board.

Code: 932

Display: Power Off/on 932: Error
Description: Inverter CPU Clock Frequency Error
Remedy: The inverter CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V72-13 board. Replace the V72-13 board.

Code: 940

Display: Power Off/on 940: Error
Description: Waste Toner Transfer Error
Remedy: The transfer mechanism of the toner duct for ID is not operating properly. Does the error still occur? Check to confirm that the basket assembly is in position (if it is engaged with the gear of the printer). Yes Check to confirm that the holder magnet D contains a magnet, and check the magnetic polarity. Yes Replace the HAL IC circuit board. Yes Replace the duct assembly toner.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie