Mã lỗi Panasonic UF4600 — Trang 3/9
Code:
Tất cả lỗi (71)
001
007
012
021
030
031
041
043
045
051
054
060
068
090
091
092
093
094
400
401
402
403
404
405
406
407
408
409
410
411
412
414
415
416
417
420
421
422
427
434
436
456
490
494
495
501
502
503
504
505
540
541
542
543
544
550
554
580
623
630
631
634
638
722
731
741
800
815
816
825
870
Description: The unit is operated under the low-temperature environment which is not covered under warranty.
Causes: 1. Thermistor defective (Operation Panel Board).
Description: Malfunction of drum cartridge.
Causes: 1. Mixing Paddle defective. 2. Defective Toner Sensor.
Description: T1 timer (35+-5 sec.) elapsed without detecting 300 bps signal.
Causes: Wrong number is dialled and the START button is pushed. Telephone line is disconnected while dialling. MAIN PCB (Modem) is defective. Receiver is defective. (It may only be transmitting CED)
Description: DCN was returned from receiver while transmitter is waiting for CFR or FTT.
Causes: Your machine's ID Number is not programmed. Possible incompatibility or incorrect Password.
Description: DCN was returned from receiver while transmitter is waiting for NSF/DIS.
Causes: Receiver working in NON-STD mode only. (Possible incompatibility)
Description: Transmitter had no polling function.
Causes: "POLLED=ON" (polling XMT ready) is not set at the transmitter. Document to be transmitted is not placed at the transmitter.
Description: Transmitter sent NSS (or DCS) followed by TCF three times, but the receiver did not respond. (CFR or FTT is usually returned)
Causes: Receiver is defective. (Modem, MAIN PCB, etc.) MAIN PCB is defective. Receiver disconnects line during first NSS (or DCS) is transmitted.
Description: Transmitter received FTT after it transmitted TCF at 2400bps. Received RTN after communicating at 2400 bps.
Causes: Line quality is poor. (TCF is damaged due to line noise) Receiver is defective. (Modem, etc.) MAIN PCB is defective.