Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF4600 — Trang 8/9

Code: 554

Description: Transmitted ERR after receiving EOR.
Causes: Line is faulty.

Code: 580

Description: Sub-address transmission to a unit that has their DIS bit 49 (NSF bit 155) OFF.
Causes: Sub-address transmission to a unit that has no Sub-address function.

Code: 623

Description: No original was in the ADF. (Built-in dialer engaged)
Causes: Operator removed the original from the ADF after dialling was completed. Original was not set properly in the ADF.

Code: 630

Description: Redial count over.
Causes: No dial tone detected. Sensor dial tone is not detected. (destination dependent) Busy tone is detected. (destination dependent) T1 timer (35 +- 5 sec.) elapsed without a signal from the receiver.

Code: 631

Description: "STOP" button was pressed during Auto Dialling.
Causes:

Code: 634

Description: Redial count over with no response or busy tone was not detected.
Causes: Telephone line cable is disconnected. Wrong number is dialled. MAIN PCB is abnormal.

Code: 638

Description: Power turned off with applicable data in memory or during communication.
Causes: Mains lead unplugged. Power failure occurred.

Code: 722

Description: Failed to obtain the Network Parameters (such as: IP Address, Subnet Mask, Default Gateway IP Address, etc.) from the DHCP server.
Causes: LAN Cable is disconnected. DHCP is not available. (Contact the Network Administrator.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie