Danh mục sản phẩm

Code :

Code: 406
Description: XMT-Password mismatched. RCV-Password mismatched. Selective RCV incomplete.
Causes: XMT, RCV password does not match. Last 4 digits of TSI does not match with the last 4 digits of ONE-TOUCH, ABBR telephone number.

Code: 407
Description: Transmitter received no response after it transmitted post message, such as EOP, MPS, EOM, etc...or received DCN.
Causes: Receiver is defective. (No paper, paper jamming, etc.) Receiver ceased receiving because of excessive error. (Line quality is poor) MAIN PCB (Modem) is defective.

Code: 408
Description: Transmitter received RTN after it transmitted EOP, MPS, or EOM.
Causes: Receiver receives data with error. (Line quality is poor) Receiver is defective. (Modem, etc.) MAIN PCB is defective.

Code: 409
Description: Transmitter receives PIN after it transmitted a post message, such as EOP, MPS, EOM, etc.
Causes: Receiver receives data with error due to poor line quality, and receiving operator requests voice contact. Receiver is defective. (Modem, etc.) MAIN PCB is defective.

Code: 410
Description: Received DCN while waiting for post command. (EOP, MPS, EOM, etc.)
Causes: Interface or line is faulty. Transmitter is defective.

Code: 411
Description: Received DCN after transmitting NSC.
Causes: Transmitter is not ready for polling communication. Password does not match between transmitter and receiver.

Code: 412
Description: No response within 12 seconds in NSS/ DCS/MPS wait state. (After transmitting FTT)
Causes: Transmitter is defective. MAIN PCB is defective.

Code: 414
Description: No response received after transmitting 3rd NSC.
Causes: Password does not match between transmitter and receiver. Transmitter is defective. (No original, document jam, etc.)

< 1 2 3 4 5 6 7 > Last ›

0