Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 2090 — Trang 2/21

Code: SC129

Description: Scanner Motor Error 6
The scanner motor speed is abnormal.
Causes: • Scanner motor defective • Scanner drive mechanism defective • PSU-E board defective • MCU board defective (scanner motor control unit)

Code: SC143

Description: SBU (Sensor Board Unit) Error 1
At power on, the SBU white level adjustment, black level check, and final SBU white level check did not execute.
Causes: • SBU defective • IPU defective • BCU defective • Harness between the SBU and IPU defective • Standard white plate not installed correctly, or is dirty • Scanner mirrors and/or lenses are dirty or installed incorrectly

Code: SC144

Description: SBU (Sensor Board Unit) Error 2
At power on, the specified SBU ID (GASBUP and LM98513) could not be read after 3 tries
Causes: • SBU defective • IPU defective • BCU defective • Harness between SBU and IPU defective

Code: SC300

Description: Charge Corona Output Error 1 (Charge Leakage)
A high feedback voltage for the charge corona (more than 4.5 V) was detected from the CBG (charge, bias, grid) power pack 9 times within 60 ms.
Causes: • CBG power pack defective • Poor charge corona unit connection • Charge corona unit connector defective

Code: SC301

Description: Charge Corona Output Error 2 (Circuit Open)
A low feedback voltage for the charge corona (less than 1.5 V) was detected from the CBG power pack 9 times for 60 ms.
Causes: • Charge/bias/grid power pack defective • Poor charge corona unit connection • Charge corona unit connector defective

Code: SC303

Description: Charge Grid Output Error 1 (Grid Leakage)
A high feedback voltage for the grid (more than 4.5 V) was detected from the CBG power pack 9 times consecutively for 60 ms.
Causes: • Charge/bias/grid power pack defective • Poor charge corona unit connection • Charge corona unit connector defective

Code: SC304

Description: Charge Grid Output Error 2 (Grip Open)
A low feedback voltage for the grid (less than 1.0 V) was detected from the CBG power pack 9 times for 60 ms.
Causes: • Charge/bias/grid power pack defective • Poor charge corona unit connection • Charge corona unit connector defective

Code: SC305

Description: Charge Corona Wire Cleaner Error 1
The charge corona wire cleaner does not return to its home position, and there is no stop signal 30 s after cleaning starts.
Causes: • Charge corona wire cleaner lock defective • Charge corona wire cleaner motor defective • BCU defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie