Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 2090 — Trang 21/21

Code: SC990

Description: Software Performance Error 1
An unexpected operation was encountered by the software.
Causes: • Software crash; reboot the machine

Code: SC991

Description: Software Error 2
Software attempted to execute an unexpected operation. However, unlike SC990, operation can be recovered.
Causes: • Software crash; reboot the machine

Code: SC992

Description: Software Error 4: Undefined Error
Software encountered an unexpected operation. This error is issued if the error cannot be covered by SC990.
Causes: • Software defective • An error undetectable by any other SC code occurred

Code: SC997

Description: Application Selection Error
An application did not start after pressing the appropriate key on the operation panel.
Causes: • Software bug; change the firmware for the application that failed • A RAM or DIMM option required by the application is not installed or not installed correctly.

Code: SC998

Description: Application Start Error
Register processing does not execute for any application within 60 s after the machine is powered on. No application starts correctly, and all end abnormally.
Causes: • Software defective; change the firmware for the application that failed • A RAM or DIMM option required by the application is not installed or not installed correctly.

Code: SC999

Description: Program Download Error
The program download from the SD card does not execute normally. This SC is not logged.
Causes: • Card installed incorrectly • BCU defective • SD card defective • Controller board defective • Power down during program downloading • Wrong type of card inserted (see Section 5 .Service Tables. for downloading procedures)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie