Description: Fusing Temperature Error 2
Temperature goes up and down during a long interval, by 20°C (68°C) more than 3 times during a 60 sec. interval.
Causes: • Check the thermistor connection. • Check the fusing lamp connections. • Replace the MCU.
Description: Zero-Cross Signal Errors
The zero-cross signal from the ac power supply makes a trigger pulse to control the supply of power. It automatically detects 50/60 Hz.
Causes: • Check that the frequency of the power supply to the machine is correct. • Replace the PSU. • Replace the MCU
Description: Pressure Roller Thermistor Error 1
Fusing temperature control detected that the analog voltage output by the pressure roller thermistor was more than 5V. The pressure roller thermistor is disconnected.
Causes: • Check the thermistor connection. • Replace the thermistor. • Replace the MCU.
Description: Pressure Roller Thermistor Error 2
(2 times at 1.5 sec. intervals) that the analog voltage output by the pressure roller thermistor was less than 0.2 V. The pressure roller thermistor has short-circuited.
Causes: • Check the thermistor connection. • Replace the thermistor. • Replace the MCU.
Description: Communication Error Between IPU and CIS
A break signal was detected after the communication connection. A communication error was sent back 3 times.
Description: Communication Error Between Controller and ECU
One of these problems occurred: • Serial communication error • Serial data overflowed in the receive data buffer.
Causes: • Replace the MCU.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.