Description: Charge corona unit electrical leak
The supply to the charge corona unit is continuously output, and the unit is operating at the minimum PWM duty value. 1 Volt (or more) returns for 300 milliseconds.
Causes: • Short circuit in the charge corona unit • Defective high voltage supply board • Defective harness (BICU - high voltage supply board)
Description: Charge grid electrical leak
The returning voltage N from the OPC unit is detected for 60 ms. N >= 1/2 output value
Causes: • Defective PCU installation (OPC belt) • Short circuit in the charge grid • Defective high voltage supply board • Defective harness (BICU - high voltage supply board)
Description: Charge corona unit cleaner error
• Cleaning starts. The lock signal is not detected within 30 seconds. • Cleaning starts. The cleaner starts to turn. The lock signal is detected within 6 seconds. • The lock signal is detected while the unit is moving away from the home position. The next lock signal is detected within 6 seconds after the unit has turned toward the home position.
Causes: • Defective PCU installation (OPC belt) • Defective cleaner • Incorrect charge corona unit installation • Toner fallen into the cleaner drive mechanism
Description: Development motor 1 error
• Development motor 1 changes its speed from half to normal. 1) Motor 1 does not detect a 0.3second lock signal within 0.9 seconds. 2) Motor 1 does not detect the lock signal for 0.3 seconds after it detected a 0.3-second lock signal before. • The development motor starts 3) Motor 1 does not detect a 1second lock signal within 3 seconds. 4) Motor 1 does not detect the lock signal for 0.3 seconds after it detected a 1-second lock signal before.
Causes: • Defective development motor (Y & M) • Too much load on the development unit (Y & M) • Defective harness connection
Description: Development motor 2 error
• Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3-second lock signal before. • The development motor starts 5) Motor 2 does not detect a 1second lock signal within 3 seconds. 6) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 1-second lock signal before.
Causes: • Defective development motor (K & C) • Too much load on the development unit (K & C) • Defective harness connection
Description: 1st transfer (image transfer) circuit open
The returning voltage N from the image transfer unit is detected for 60 ms. N >= 1/2 output value
Causes: • Open circuit in the image transfer belt • Defective high voltage supply board • Defective harness (BICU - high voltage supply board)
Description: 2nd transfer (paper transfer) electric leakage (+)
Paper transfer starts. The positive (+) output is at the minimum PWM duty value. The returning voltage does not reach 4.29 V or less for 60 milliseconds.
Causes: • Short circuit in the paper transfer unit • Defective high voltage supply board • Defective harness (BICU - high voltage supply board)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.