Mã lỗi Ricoh Aficio AP2700
Code:
Tất cả lỗi (61)
0201
0301
1101
1102
11xx
1401
1402
1403
1404
1501
1601
1602
1Bxx
1Cxx
2100
21xx
2501
2508
3002
47xx
SC 696
SC 750
SC 751
SC 752
SC302
SC320
SC321
SC322
SC324
SC390
SC391
SC392
SC401
SC402
SC411
SC500
SC501
SC502
SC503
SC504
SC506
SC507
SC508
SC509
SC541
SC542
SC543
SC544
SC546
SC547
SC590
SC610
SC692
SC722
SC725
SC726
SC730
SC733
SC734
SC735
SC980
Description: On-board SDRAM read/verify failed.
Causes: Replace the controller if this error is frequent.
Description: SDRAM DIMM (option) read/verify failed.
Causes: Replace the SDRAM DIMM if this error is frequent.
Description: Data transmission did not finish within the specified time.
Causes: An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test.
Description: Data looped back to the controller is not the same as the data transmitted.
Causes: The loop-back connector may be defective. Try using another one.
Description: Parallel interface error.
Causes: Replace the controller if this error is frequent.
Description: The controller NVRAM has a problem.
Causes: Replace the NVRAM if this error is frequent.
Description: NVRAM checksum error or the battery has run out.
Causes: Replace the NVRAM if this error is frequent.
Description: NVRAM write error
Causes: Replace the NVRAM if this error is frequent.