Danh mục sản phẩm

Code :

Code: 2501
Description: The data in the PS DIMM is damaged.
Causes: Replace the PS DIMM if this error is frequent.

Code: 2508
Description: The data in the IC card is damaged.
Causes: Reprogram the IC card and try again.

Code: 3002
Description: A damaged cluster was found on the HDD.
Causes: The damaged cluster is automatically marked as “bad”. If this error is frequent, format the HDD.

Code: 47xx
Description: Controller ASIC error.
Causes: Replace the controller.

Code: SC 696
Description: Communication error between the engine board and the finisher Definition: [B] The engine board cannot communicate with the finisher properly.
Causes: · Poor connection of the interface cable for the finisher · Finisher main board defective · Engine board defective

Code: SC 750
Description: Interchange unit connection error Definition: [B] The engine board cannot communicate with the interchange unit properly when the duplex unit is installed.
Causes: · Poor connection between the engine board and the interchange unit

Code: SC 751
Description: Bridge unit connection error Definition: [B] The engine board cannot communicate with the bridge unit properly when the finisher is installed.
Causes: · Poor connection between the engine board and the bridge unit

Code: SC 752
Description: Finisher connection error Definition: [B] The engine board cannot communicate with the finisher properly when the bridge unit is installed.
Causes: · Poor connection between the finisher and bridge unit

< 1 2 3 4 5 6 > Last ›

0