Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio AP2700 — Trang 7/8

Code: SC546

Description: Unstable fusing temperature Definition: [A] Fusing temperature more than 60 °C: The fusing temperature does not rise 2°C or more within 6 seconds after the fusing lamp has been on. Fusing temperature 60 °C or less: The fusing temperature does not rise 2°C or more during a 6 second interval (the 6 s timer starts 14 s after the fusing lamp turned on).
Causes: · Thermistor defective · Poor connection of the fusing unit · Power supply unit defective

Code: SC547

Description: Zero cross signal malfunction Definition: [A] Zero cross signals are not detected within a certain period.
Causes: · Power supply board defective · Engine board defective

Code: SC590

Description: Fusing fan motor error Definition: [B] The CPU detects an exhaust fan lock signal for more than 3.5 seconds.
Causes: · Poor connection of the exhaust fan motor · Too much load on the motor drive

Code: SC610

Description: Communication error between the engine board and duplex unit Definition: [B] The engine board cannot communicate with the duplex unit properly.
Causes: · Poor connection for the interface cable for the duplex unit · Duplex control board defective · Engine board defective

Code: SC692

Description: Communication error between the engine board and the printer controller Definition: [B] The engine board cannot communicate with the printer controller properly.
Causes: · Poor connection between the engine board and the printer controller board. · Printer controller defective · Engine board defective

Code: SC722

Description: Finisher jogger motor error Definition: [B] 1) The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. 2) The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: · Jogger H.P sensor defective · Jogger motor defective

Code: SC725

Description: Finisher stack feed-out motor error Definition: [B] The stack feed-out belt H.P sensor is not activated within a certain period after the stack feed-out motor is turned on.
Causes: · Stack feed-out H.P sensor defective · Stack feed-out motor defective

Code: SC726

Description: Finisher shift motor error Definition: [B] Tray shift is not detected within a certain period after the shift motor is turned on.
Causes: · Shift motor defective · Shift tray half-turn sensor defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie