Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio AP2700 — Trang 6/8

Code: SC506

Description: Paper tray motor lock (optional paper tray unit) Definition: [C] A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
Causes: · Paper tray unit motor defective · Too much load on the drive mechanism

Code: SC507

Description: Tandem tray lift error (optional LCT) Definition: [C] The low limit sensor is not activated after the paper tray lift motor has been on to lower the tandem tray for 8 seconds.
Causes: · Paper tray lift motor defective · Low limit sensor defective · Too much load on the drive mechanism

Code: SC508

Description: Rear fence drive error (optional LCT) Definition: [C] The return position sensor is not activated after the rear fence drive motor has been on to lower the tandem tray for 8 seconds.
Causes: · Rear fence motor defective · Return position sensor defective · Too much load on the drive mechanism

Code: SC509

Description: Side fence drive error (optional LCT) Definition: [C] The side fence positioning sensor is not activated in 3 s when the paper stack in the left tray is moved to the right tray. The side fence close sensor is not activated in 3 s after moving the paper stack to the right tray.
Causes: · Side fence motor defective · Side fence position sensor defective · Side fence close sensor defective · Too much load on the drive mechanism

Code: SC541

Description: Fusing temperature warm-up error Definition: [A] The fusing temperature detected by the thermistor was below 13 °C for 10 seconds
Causes: · Fusing thermistor defective or out of position · Fusing lamp open · Fusing thermofuse open · Power supply board defective · Poor connection of the fusing unit

Code: SC542

Description: Fusing temperature warm-up error Definition: [A] The fusing temperature does not reach the fusing standby temperature within 40 seconds after the main switch is turned on.
Causes: · Fusing thermistor defective or out of position · Fusing lamp open · Fusing thermofuse open · Power supply board defective · Poor connection of the fusing unit

Code: SC543

Description: Fusing overheat error Definition: [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor.
Causes: · Fusing thermistor defective · Power supply board defective

Code: SC544

Description: Fusing low temperature error Definition: [A] A fusing temperature of lower 100°C is detected for 1 second by the fusing thermistor.
Causes: · Fusing thermistor defective · Power supply board defective · Poor connection of the fusing unit
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie