Mã lỗi Ricoh Aficio CL4000DN — Trang 16/16
Code:
Tất cả lỗi (125)
195
202
203
204
205
210
211
212
213
220
222
224
226
230
231
232
233
234
235
236
237
240
241
242
243
270
300
301
302
303
304
305
306
307
325
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
380
396
397
400
418
442
452
490
491
531
532
541
542
543
544
545
547
557
670
687
690
818
819
819
819
819
820
820
820
820
820
820
820
820
820
820
820
821
821
822
822
823
823
823
824
827
828
828
829
829
829
850
851
853
854
855
856
857
860
861
863
864
865
866
867
868
870
900
920
921
990
991
992
998
Description: Printer font error [B] No font is detected in the machines that have the font in the SD card when the printer application is run.
Causes: • Install the System, Printer Application, NIB, and Web System firmware.
Remedy:
Description: Software performance error 1 [D] The software makes an unexpected operation.
Causes: • Defective software • Defective controller • Software error
Remedy: 1. Reinstall the controller and/or engine main firmware. 2. See NOTE 1 at the end of the SC table.
Description: Software performance error 2 [C] Unexpected software error detected, which does not affect operation of the machine
Causes: The machine does not stop and the SC code is not displayed. The machine automatically recovers. However, the SC code is logged in the engine summary sheet (SMC).
Remedy:
Description: SC not defined [D] SC that is not controlled in the system occurs.
Causes: • Defective system software
Remedy:
Description: Application start error [D] No applications start within 60 seconds after the power is turned on.
Causes: • Loose connection of RAM-DIMM, SD card in slot 1 • Defective controller • Software problem
Remedy: 1. Check if the RAM-DIMM and SD card in slot 1 are properly connected. 2. Reinstall the controller system firmware. 3. Replace the controller.