Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio CL5000

Code: 201

Description: Polygon motor error . The polygon motor starts operating. - The lock signal is not detected within 20 seconds. . The polygon motor starts operating. - The lock signal is detected within 20 seconds. - After a 3-second waiting time, no lock signal is detected within 20 seconds. . The polygon motor strops operating. - The lock signal is not detected within 20 seconds. . The polygon motor is operating. - The lock signal remains undetected for 0.5 seconds.
Causes: • Defective polygon motor • Defective harness

Code: 220

Description: 1st beam synchronization error A polygon motor lock is detected; the LD door is closed; the LD remains on. - The LD error (1st beam synchronization error) continues for 0.5 seconds.
Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BCU

Code: 221

Description: 2nd beam synchronization error A polygon motor lock is detected; the LD door is closed; the LD remains on. - The LD error (2nd beam synchronization error) continues for 0.5 seconds.
Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BCU

Code: 230

Description: FGATE on error A transfer belt mark is detected. - No FGATE on signal is detected within 175+50 milliseconds.
Causes: • Defective BCU

Code: 231

Description: FGATE off error A FGATE assert signal is detected. - The FGATE negate signal is not detected within 30 seconds.
Causes: • Defective BCU

Code: 241

Description: LD error An LD error continues for 0.5 seconds. (After an LD error is detected, an LD error release is written to the GAVD chip during monitoring.)
Causes: • Defective LD unit

Code: 280

Description: Image transfer belt mark detection error . An imaging process starts. - No belt mark is detected in 1 revolution. . A color imaging process starts. - A mono color image is transferred. - FGATE becomes active. - No belt mark is detected in 1 revolution. . Thick paper or OHP film is used. - The belt slows down. - No belt mark is detected in 1 revolution.
Causes: • Defective BCU • Poor electrical connection • Noise

Code: 281

Description: GAPCI communication error Data is transferred. - The CPU does not detect the communication ACK signal from GAPCI.
Causes: • Defective BCU
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie