Description: Charge corona unit electrical leak The charge corona unit keeps outputting; the unit is operating at the minimum PWM duty value. - 4.5 Volt (or more) is returning for 60 milliseconds.
Causes: • Short circuit in the charge corona unit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Description: Charge corona unit disconnection The charge corona unit keeps outputting. - The unit is operating at the maximum PWM duty value for 60 milliseconds.
Causes: • Defective PCU installation • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Description: Charge grid electrical leak The charge grid keeps outputting. - The returning voltage exceeds the target by 0.5 Volt or more for 120 milliseconds.
Causes: • Short circuit in the charge grid • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Description: Charge corona unit cleaner error . Cleaning starts. - The lock signal is not detected within 30 seconds. . Cleaning starts. - The cleaner turns. - The lock signal is detected within 6 seconds. . The lock signal is detected while the unit is moving away from the HP. - The next lock signal is detected within 6 seconds after the unit has turned toward the HP.
Description: Development error 1 (K/Y) A development process starts. - The returning voltage exceeds the target by 0.5 Volt or more for 60 milliseconds.
Causes: • Short circuit in the development unit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Description: Development error 2 (C/M) A development process starts. - The returning voltage exceeds the target by 0.5 Volt or more for 60 milliseconds.
Causes: • Short circuit in the development unit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Description: Development motor error . The development motor starts or changes speed. - The motor does not detect a 1-second lock signal within 3 seconds. . The development motor starts. - The lock signal is detected during normal operation. - The lock signal is interrupted for 1 second or more.
Causes: • Defective development motor
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.