Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio CL5000 — Trang 3/12

Code: 400

Description: 1st transfer 400 D (image transfer) electric leakage (+) Image transfer starts. - The process operates at the minimum PWM duty value. The returned current exceeds 1.8 V for 180 milliseconds.
Causes: • Short circuit in the image transfer unit • Defective image transfer belt • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 401

Description: 1st transfer (image transfer) electric leakage (.) Image transfer starts. - The negative (.) output is at the maximum PWM duty value for 60 milliseconds.
Causes: • Short circuit in the image transfer belt • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 410

Description: 2nd transfer (paper transfer) electric leakage (+) Paper transfer starts. - The positive (+) output is at the minimum PWM duty value. - The returning voltage stays at 2.7 V or more for 60 milliseconds.
Causes: • Short circuit in the paper transfer unit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 411

Description: 2nd transfer (paper transfer) electric leakage (.) Paper transfer starts. - The negative (.) output is at the minimum PWM duty value. - The returning voltage stays at 4.5 V or more for 60 milliseconds.
Causes: • Short circuit in the paper transfer unit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 412

Description: 2nd transfer (paper transfer) disconnection (+) Paper transfer starts. - The positive (+) output is at the maximum PWM duty value for 60 milliseconds.
Causes: • Right cover not closed • Defective transfer roller contact mechanism • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 413

Description: 2nd transfer (paper transfer) disconnection (.) Paper transfer starts. - The negative (.) output is at the maximum PWM duty value for 60 milliseconds.
Causes: • Right cover not closed • Defective transfer roller contact mechanism • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)

Code: 420

Description: Discharge error (fusing bias) The discharge circuit is operating at the maximum PWM duty value for 60 milliseconds.
Causes: • Discharge pin short circuit • Defective high voltage supply board • Defective harness (BCU - high voltage supply board) • Scratched fusing belt

Code: 421

Description: Discharge plate error During discharging, the leakage detection signal is low for 60 milliseconds.
Causes: • Short circuit in the discharge plate • Defective high voltage supply board • Defective harness (BCU - high voltage supply board)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie