• Code: SC325
• Description: Development motor error 2: M
  The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
• Causes: • Development motor shaft locked, blocked by and obstruction • DRB (Drive Board) defective

• Code: SC326
• Description: Development motor error 3: C
  The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
• Causes: • Development motor shaft locked, blocked by and obstruction • DRB (Drive Board) defective

• Code: SC327
• Description: Development motor error 4: Y
  The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
• Causes: • Development motor shaft locked, blocked by and obstruction • DRB (Drive Board) defective

• Code: SC336
• Description: Developer set error 1: K
  The value of Vcnt is set at the maximum or minimum setting when the TD sensor is initialized.
• Causes: • Film seal not removed from the black, magenta, cyan, or yellow developer case

• Code: SC337
• Description: Developer set error 2: M
  The value of Vcnt is set at the maximum or minimum setting when the TD sensor is initialized.
• Causes: • Film seal not removed from the black, magenta, cyan, or yellow developer case

• Code: SC338
• Description: Developer set error 3: C
  The value of Vcnt is set at the maximum or minimum setting when the TD sensor is initialized.
• Causes: • Film seal not removed from the black, magenta, cyan, or yellow developer case

• Code: SC339
• Description: Developer set error 4: Y
  The value of Vcnt is set at the maximum or minimum setting when the TD sensor is initialized.
• Causes: • Film seal not removed from the black, magenta, cyan, or yellow developer case

• Code: SC340
• Description: Toner cartridge set error 1: K
  The machine cannot read the ID chip of the black, magenta, cyan, or yellow toner cartridge.
• Causes: • Black, magenta, cyan, or yellow toner cartridge set incorrectly