Danh mục sản phẩm

Code :

Code: 01
Description: Engaged or no fax tone
Causes: This code appears after 6 failed attempts.
Remedy: Restart the transmission at a later time.

Code: 03
Description: Stopped by operator
Causes: Communication stopped by the operator by pressing the key
Remedy:

Code: 04
Description: Programmed number invalid
Causes: Invalid programmed single-key or quick-dial number (Example: a delayed transmission has been programmed with a single key and this key has been deleted).
Remedy: Check the validity of the programmed number and/or the single-key associated to the programmed number.

Code: 05
Description: Scanning fault
Causes: An incident has occurred at the location of the document to be transmitted (Example: the sheet is jammed).
Remedy: Check the ADF module.

Code: 06
Description: Printer not available
Causes: An incident has occurred on the printer (Example: out of paper, paper jam or cover open). In the case of a reception, this incident code only appears if the "RECEPTION WITHOUT PAPER" parameter is set to "WITHOUT PAPER".
Remedy: Check the printer.

Code: 07
Description: Disconnect
Causes: The communication has been cut (bad connection).
Remedy: Check the called number.

Code: 08
Description: Quality
Causes: The document that you have transmitted has not been received correctly.
Remedy: Contact your correspondent to check whether it is necessary to retransmit the document: the interference may have occurred in an unimportant area of the document.

Code: 0A
Description: No document to recover
Causes: You have attempted to recover a document from a correspondent, but the latter has not prepared (stored) the document or the password that was entered is wrong.
Remedy: Contact your correspondent to check whether the document to recover has been prepared or to check the validity of the password.

1 2 3 >

0