• Code: 746
• Description: Stack feed motor error
  The stack feed HP sensor in the 1000-sheet booklet finisher did not detect "ON" twice (once: jam error) within the prescribed time after the stack feed motor turned on. -or- The stack feed HP sensor did not detect "OFF" twice (once: jam error) for the specified time after the stack feed motor turned on.
• Causes: • Motor drive obstructed • Stack feed motor harness loose, broken • Stack feed motor defective

• Code: 750
• Description: Tray lift motor error
  The tray lift motor in the 1000- sheet booklet finisher is not operating.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Stack height sensor dirty, harness loose, broken • Motor defective • Stack height sensor defective

• Code: 751
• Description: Stack pressure solenoid error
  The stack pressure solenoid in the finisher is not operating.
• Causes: • Solenoid harness loose, broken • Solenoid obstructed • Stack height sensor dirty, harness loose, broke • Solenoid defective • Stack height sensor defective

• Code: 760
• Description: Finisher punch motor error
  The punch HP sensor did not activate within the prescribed time after the punch motor turned on. The 1st detection issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Punch HP sensor harness loose, broken • Punch motor harness loose, broken • Punch motor obstructed • Punch motor defective • Punch HP sensor defective

• Code: 761
• Description: Folder plate motor error
  The folder plate in the 1000-sheet booklet finisher moved but was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Folder plate motor drive obstructed • Folder plate HP sensor harness loose, broken • Folder plate motor harness loose, broken • Folder plate motor defective • Folder plate HP sensor defective

• Code: 763
• Description: Punch movement motor error
  The punch unit moved but it was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective

• Code: 764
• Description: Paper position slide motor error
  The paper position sensor detected movement of the slide but the slide was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective

• Code: 765
• Description: Fold unit bottom fence lift motor
  The fold unit bottom fence lift motor in the 1000-sheet booklet finisher is not operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective