Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP3550B — Trang 4/17

Code: 354

Description: ID sensor adjustment timeout error
Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V ±0.2V within the prescribed time.
Causes: • ID sensor dirty or defective • ID sensor harness disconnected, or connector damaged • BCU defective • High voltage power supply board (power pack) defective

Code: 355

Description: ID sensor error
For more details about the cause of the problem, please refer to SC350 to 354 above.
Causes: • ID sensor dirty or defective • ID sensor harness disconnected, or connector damaged • BCU defective • High voltage power supply board (power pack) defective

Code: 389

Description: TD sensor error 1
TD sensor output was less than 0.5V, or more than 0.5V 10 times in succession. If the fax unit is installed, this SC is issued immediately. If the fax unit is not installed, this SC is issued after the prescribed number of copies has printed.
Causes: • TD sensor abnormal
• Poor connection of the PCU

Code: 390

Description: TD sensor error 2
The TD sensor outputs less than 0.5V or more than 4.0V 10 times consecutively during copying. Note: If the fax option is installed, this SC is issued immediately. If the fax option is not installed, this SC is issued after the prescribed number of pages is copied.
Causes: • TD sensor abnormal
• Poor connection of the PCU

Code: 391

Description: Development bias leak
A development bias leak signal is detected.
Causes: • Poor connection at the PCU bias terminal • High voltage supply board defective

Code: 392

Description: TD sensor initial setting error
Initialization of the new PCU unit failed (the drum and development roller did not start rotating).
Causes: • The PCU toner seal was not removed • ID sensor harness loose, broken • TD sensor harness loose, broken • ID sensor defective • TD sensor defective

Code: 398

Description: PCU error (South Korea only)
Illegal PCU unit.
Causes: Install the correct type of PCU.

Code: 399

Description: Illegal toner bottle (South Korea only)
The installed toner bottle installed is not intended for use with this machine.
Causes: Install the correct type of toner bottle.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie