Mã lỗi Ricoh Aficio MP3550B — Trang 2/17
Code:
Tất cả lỗi (129)
101-1
101-2
120
121
141
142
143
144-1
144-2
144-3
144-4
161
165
202
203
204
220
230
231
240
302
350
351
353
354
355
389
390
391
392
398
399
401
402
411
490
500
501
502
503
504
506
508
509
510
541
542
543
544
545
547
551
552
553
554
555
557
559
590
620
621
632
633
634
635
636
641
650
651
669
670
672
687
721
722
723
725
730
740
742
746
750
751
760
761
763
764
765
766
791
792
816
819
839
851
853
854
855
856
857
858
859
860
861
863
864
865
866
867
868
870
872
873
874
875
876
877
878
880
900
901
920
921
925
990
991
992
997
998
Description: SBU serial communication error Poor SBU power supply caused by SIO, or BCU detection board defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective
Description: SBU GASBU reset error SBU defective, BCU detection circuit defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective
Description: SBU version error SBU defective, BCU detection circuit defective.
Causes: • Harness connection at IPU, BCU, SBU loose, broken, defective. • Spurious electrical noise on power supply line • IPU defective • BCU defective • SBU defective
Description: IPU Error The self-diagnostic test detected an error at the IPU at power on, or after the machine returned from energy save mode.
Causes: • Harness between SBU and IPU loose or broken • IPU defective • SBU defective
Description: Copy Data Security Unit error An error occurred when the machine attempted to recognize the Copy Data Security Unit board.
Causes: • Check installation of Copy Data Security (CDS) Unit • CDS unit not correct type for the machine • CDS unit defective
Description: Polygon motor error 1: ON timeout The polygon mirror motor did not reach the targeted operating speed within 10 sec. after turning on or changing speed
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective
Description: Polygon motor error 1: OFF timeout The polygon mirror motor did not leave READY status within 3 sec. after polygon motor switched off.
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective
Description: Polygon motor error 1: XSCRDY signal error The XSCRDY signal remained HIGH for 200 ms while the LD unit was firing.
Causes: • Polygon motor/driver board harness loose or broken • Polygon motor/driver board defective • Laser optic unit defective • IPU defective