Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP3550B — Trang 5/17

Code: 401

Description: Transfer roller leak error 1
A transfer roller current leak signal wad detected. (The current feedback signal for the transfer roller was not detected within the correct time.)
Causes: • High voltage supply board set incorrectly or defective • Transfer roller set incorrectly or damaged • Transfer unit set incorrectly

Code: 402

Description: Transfer roller leak error 2
A transfer roller current leak signal is detected. The current feedback signal for the transfer roller is not detected within the correct time.
Causes: • Transfer roller set incorrectly or damaged • High voltage supply board set incorrectly or defective

Code: 411

Description: Separation bias leak error
A separation bias leak signal was detected.
Causes: • High voltage supply board defective • Discharge plate defective

Code: 490

Description: Toner supply motor leak error
More than 1 ampere supplied to the toner supply motor for longer than 200 ms.
Causes: • Toner supply motor defective

Code: 500

Description: Main motor lock
The machine detected motor lock (motor is not operating correctly)
Causes: • An obstruction has blocked operation of the main motor • Main motor harness loose or broken • Main motor or main motor driver board defective

Code: 501

Description: 1st paper tray lift motor malfunction
The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
Causes: • An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. • Paper lift sensor connection loose, disconnected, or damaged • Paper lift sensor defective • Tray lift motor connection loose, disconnected, or damaged • Tray lift motor defective

Code: 502

Description: 2nd paper tray lift motor malfunction
The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
Causes: • An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. • Paper lift sensor connection loose, disconnected, or damaged • Paper lift sensor defective • Tray lift motor connection loose, disconnected, or damaged • Tray lift motor defective

Code: 503

Description: 3rd paper tray lift motor malfunction (optional Paper Tray Unit)
The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
Causes: • An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. • Paper lift sensor connection loose, disconnected, or damaged • Paper lift sensor defective • Tray lift motor connection loose, disconnected, or damaged • Tray lift motor defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie