• Code: 761
• Description: Finisher folder plate motor error
  The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Folder plate HP sensor disconnected, defective • Folder plate motor disconnected, defective • Folder plate motor overloaded due to obstruction.

• Code: 763
• Description: Punch movement motor error
  The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Motor harness disconnected, loose, defective • Defective motor

• Code: 764
• Description: Paper position sensor slide motor error
  The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Motor harness disconnected, loose, defective • Defective motor

• Code: 765
• Description: Folding unit bottom fence lift motor
  The folding unit bottom fence movement is not finished within a certain time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective

• Code: 766
• Description: Clamp roller retraction motor error
  The clamp roller movement is not finished within a certain time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective

• Code: 767
• Description: Stack junction gate motor error
  The stack junction gate motor moves but the stack junction gate is not detected at its position within a specific time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Motor broken • Motor connection loose • Motor overloaded

• Code: 770
• Description: Shift motor error
  The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
• Causes: • Defective shift motor • Defective shift motor HP sensor

• Code: 791
• Description: Bridge unit error
  The machine recognizes the finisher, but does not recognize the bridge unit.
• Causes: • Defective connector • Broken harness