• Code: 700
• Description: Original stopper HP errorWhen the pick-up motor turns on clockwise, the original stopper HP sensor does not detect the home position of the original stopper.
• Causes: • Defective original stopper HP sensor • Defective pick-up motor • Defective DF drive board

• Code: 701
• Description: Pick-up roller HP error
  When the pick-up motor turns on counterclockwise, the pick-up roller HP sensor does not detect the home position of the pick-up roller.
• Causes: • Defective pick-up roller HP sensor • Defective pick-up motor • Defective DF drive board

• Code: 721
• Description: Finisher jogger motor error
  The jogger fences move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC code.
• Causes: • Jogger HP sensor disconnected, defective • Jogger motor disconnected, defective • Jogger motor overloaded due to obstruction • Finisher main board and jogger motor

• Code: 723
• Description: Stack feed-out motor error
  • The stack feed-out HP sensor does not detect the home position of the stack feed-out belt 3000ms after the stack feed-out belt has moved to its home position. • The stack feed-out HP sensor does not turn off 200 ms after the stack feed-out belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: • Defective stack feed-out HP sensor • Overload on the stack feed-out motor • Defective stack feed-out motor
  • Defective main board • Disconnected or defective harness

• Code: 725
• Description: Finisher exit guide plate motor error
  After moving away from the guide plate position sensor, the exit guide is not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Guide plate motor disconnected, defective • Guide plate motor overloaded due to obstruction • Guide plate position sensor disconnected, defective

• Code: 727
• Description: Shift jogger motor 2 error
  The side fence does not retract within the prescribed time after the shift jogger motor 2 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Shift jogger motor 2 disconnected, defective • Shift jogger motor 2 overloaded due to obstruction • Shift jogger 2 HP sensor disconnected, defective

• Code: 728
• Description: Shift jogger retraction motor error
  The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Shift jogger retraction motor broken • Shift jogger retraction motor connection loose • Shift jogger retraction motor overloaded • Defective shift jogger retraction HP sensor

• Code: 730
• Description: Finisher Tray 1 shift motor error
  The shift roller HP sensor of the upper tray does not activate within the prescribed time after the shift tray starts to move toward or away from the home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Shift tray HP sensor of the upper tray disconnected, defective • Shift tray motor of the upper tray disconnected, defective • Shift tray motor of the upper tray overloaded due to obstruction