Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP4002 — Trang 16/24

Code: 722-24

Description: 1000-Sheet Finisher Error: Finisher exit guide plate motor error
The exit guide plate HP sensor did not activate within the prescribed time after the exit guide plate motor turned on.
Causes: Finisher exit guide plate motor drive is obstructed (jammed paper, paper
scraps, etc.)
Exit guide plate motor harness loose, broken
Exit guide plate HP sensor harness loose, broken
Exit guide plate motor defective
Exit guide plate HP sensor defective

Code: 722-30

Description: 1000-Sheet Finisher Error: Front fence motor error
The jogger fence motor in the finisher is not operating.
Causes: Jogger motor drive is obstructed (jammed paper, paper scraps, etc.)
The motor harness is loose or broken
Jogger fence HP sensor dirty, loose, defective
Jogger fence motor defective

Code: 722-41

Description: 1000-Sheet Finisher Error: Feed-out belt motor error
The feed-out belt did not return to the home position within the prescribed time.
Causes: Feed-out belt motor drive is obstructed (jammed paper, paper scraps,
etc.)
Motor harness loose or broken
Feed-out belt HP sensor dirty, disconnected, broken
Motor defective

Code: 722-42

Description: 1000-Sheet Finisher Error: Stapler movement motor
The 1st detection failure issues a jam error, and the 2nd failure causes this SC code. The stapler HP sensor is not activated within the specified time after the stapler motor turned on.
Causes: Stapler or motor drive is blocked by obstruction
Motor harness loose or broken
Stapler HP sensor harness loose, broken
Motor defective
Stapler HP sensor defective

Code: 722-44

Description: 1000-Sheet Finisher Error: Corner stapler motor error
The 1st detection failure issues a jam error, and the 2nd failure causes this
SC code.
The stapler motor does not switch off within the prescribed time after
operating.
The HP sensor of the staple unit does not detect the home position after
the staple unit moves to its home position.
The HP sensor of the staple unit detects the home position after the staple
unit moves from its home position.
Causes: Staple jam
Number of sheets in stack exceeds allowed number of sheets for stapling
Stapler motor obstructed
Stapler motor defective

Code: 722-70

Description: 1000-Sheet Finisher Error: Tray lift motor error
The tray lift motor is not operating.
Causes: Motor harness loose, broken
Motor drive obstructed
Stack height sensor dirty, harness loose, broken
Motor defective
Stack height sensor defective

Code: 722-71

Description: 1000-Sheet Finisher Error: Shift tray motor error
The shift tray motor is not operating.
Causes: Shift motor drive is obstructed (jammed paper, paper scraps, etc.)
Shift motor harness loose, broken
Shift tray HP sensor harness loose, broken
Shift motor defective
Shit tray HP sensor defective

Code: 770

Description: Shift motor error
The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
Causes: • Defective shift motor • Defective shift motor HP sensor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie