• Code: 720-73
• Description: 2000/3000-Sheet (booklet) Finisher Error: Shift jogger motor 2 error
  The side fence does not retract within the prescribed time after the shift jogger motor 2 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: Shift jogger motor 2 disconnected, defective
  Shift jogger motor 2 overloaded due to obstruction
  Shift jogger 2 HP sensor disconnected, defective

• Code: 720-74
• Description: 2000/3000-Sheet (booklet) Finisher Error: Shift jogger retraction motor error
  The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: Shift jogger retraction motor broken
  Shift jogger retraction motor connection loose
  Shift jogger retraction motor overloaded
  Defective shift jogger retraction HP sensor

• Code: 720-75
• Description: 2000/3000-Sheet (booklet) Finisher Error: Return roller motor error
  This occurs during the operation of the lower tray pressure motor
• Causes: Motor harness disconnected, loose, defective
  Motor overloaded
  Home position sensor harness disconnected, loose, defective
  Home position defective

• Code: 720-80
• Description: 2000/3000-Sheet (booklet) Finisher Error: Punch movement motor error
  The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: Motor harness disconnected, loose, defective
  Defective motor

• Code: 720-81
• Description: 2000/3000-Sheet (booklet) Finisher Error: Paper position sensor slide motor error
  The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
• Causes: Motor harness disconnected, loose, defective
  Defective motor

• Code: 722-10
• Description: 1000-Sheet Finisher Error: Upper transport motor error
  The upper transport motor in the finisher is not operating.
• Causes: Upper transport motor drive is obstructed (jammed paper, paper scraps,
  etc.)
  The motor harness is loose or broken
  Upper transport motor defective

• Code: 722-14
• Description: 1000-Sheet Finisher Error: Lower transport motor error
  The lower transport motor in the finisher is not operating.
• Causes: Lower transport motor drive is obstructed (jammed paper, paper scraps, etc.)
  The motor harness is loose or broken
  Lower transport motor defective

• Code: 722-17
• Description: 1000-Sheet Finisher Error: Exit motor error
  The exit motor in the finisher is not operating.
• Causes: Exit motor drive is obstructed (jammed paper, paper scraps, etc.)
  The motor harness is loose or broken
  Exit motor defective