Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP9002 — Trang 31/33

Code: 920

Description: Printer Error 1 An internal application error was detected and operation cannot continue.
Causes: 00 No response when PM started up 01 Timeout error during PM operation 02 Working memory error 03 Cannot start filter process 04 Abnormal exit from filter process An error was detected in the printer application program and operation cannot continue. • Defective software • Unexpected hardware resource (e.g., memory shortage) 1. Software err, cycle the machine off/on 2. Insufficient memory, add more memory

Code: 921

Description: Printer Error 2 When the printer application started, the font to use could not be found on the SD card.
Causes: • The font is not on the SD card

Code: 925

Description: Net File Function Error
Causes: 00 HDD is defective 01 NetFile management file is broken The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below the SC code. • Refer to the four procedures below (Recovery from SC925).

Code: 953

Description: Scanner image setting error The settings required for image processing using the scanner are not sent from the IPU.
Causes: • Software defective

Code: 954

Description: Printer image setting error The settings required for image processing using the printer controller are not sent from the IPU.
Causes: • Software defective

Code: 955

Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU.
Causes: • Software defective

Code: 964

Description: Printer ready error The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
Causes: • Software defective

Code: 965

Description: Print Start Error During print processing, another command to start printing was received.
Causes: Software bug
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie