Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP9002 — Trang 33/33

Code: 997

Description: Application function selection error GW The application selected by the operation panel key operated abnormally (No response, abnormal ending).
Causes: • Software (including the software configuration) defective • An option required by the application (RAM, DIMM, board) is not installed. • Nesting of the fax group addresses is too complicated. • Check the devices necessary for the application program. If necessary devices have not been installed, install them. • Check that application programs are correctly configured. • For a fax operation problem, simplify the nesting of the fax group addresses. • Take necessary countermeasures specific to the application program. If the logs can be displayed on the operation panel, see the logs.

Code: 998

Description: Application start error No applications start within 60 seconds after the power is turned on.
Causes: • Loose connection of RAM-DIMM, ROM-DIMM • Defective controller • Software problem • Check the setting of SP5-875-001. If the setting is set to "1 (OFF)", change it to "0 (ON)". • Check if the RAM-DIMM and ROM-DIMM are correctly connected. • Reinstall the controller system firmware. • Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie