Description: Print image data transfer error After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s.
Description: Scanned image data transmission error After a data transfer begins from the engine to the controller via the PCI bus, the transfer does not end within 3 s.
Description: Software continuity error The software has attempted to perform an unexpected operation. However, unlike SC 990, the object of the error is continuity of the software.
Causes: • Software program error • Internal parameter incorrect • Insufficient working memory
Description: Operation Panel Management Records Exceeded An error occurred because the number of records exceeded the limit for images managed in the service layer of the firmware. This can occur if there are too many application screens open on the operation panel.
Causes: No action required because this SC does not interfere with operation of the machine.
Causes: 01 • Defective BCU • NVRAM Replacement error • Install the previous NVRAM. • Input the serial number with SP5-811-004, and turn the main power switch off and on. 02 • Defective NVRAM • Defective controller • Update the controller firmware. • Install a new NVRAM, and turn off and on the main power switch after SC995-002 has occurred. 03 • Incorrect type controller installed • Defective controller • Replace the controller with the correct type. 04 • Incorrect model controller installed. • Replace the controller with the correct model.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.